See our Products
Home Page
See What's New
Find Nearest Rep
Service Policy
Expert Training
Send an E-Mail
Accessories
I.C. 49 Inductive Coupler Traditional 3" budget coupler. Compatible with all Aqua-Tronics tracing instruments.
I.C. 56
I.C. 56 Inductive Coupler Traditional 5" Coupler. For use with any Aqua-Tronics tracing instruments
I.C. 56 WT
I.C. 56 WT Wireless Inductive Coupler* This is an all new remote wireless inductive coupler with super safe housing and extension clamp-on feature. Its tone transmitter is built into the handle, so there is no cord to create problems or danger. The I.C. 56-WT greatly increases safety and reliability in line tracing. In addition to having no cord with a transmitter hanging at the end of it, this unit incorporates Aqua-Tronics' latest plastic housing (Auto-Clamp). This design provides automatic positive seating of the coupler contacts, plus a unique technique for manipulating the jaws at the end of a lineman's hot-stick. The inside diameter of the jaws is 5 5/8" (14.29cm). *Patent applied for.
Snoopers

Sewer Snooper & Mini Snooper for non-metallic pipe location. The Sewer Snooper is a small radio transmitter designed to easily travel inside a 4" non-metallic pipe attached to a standard rodding machine or sewer tape. It is 2" in diameter and 6 1/2" lg. As it is forced through the pipe, any of Aqua-Tronics' receivers trace the position and depth (up to 50 feet!). This method is far more effective than energizing a metal tape inside the line.

The Mini Snooper is a smaller version (1 1/2" x 4") for the Sewer Snooper, operating in pipes as small as 3" and can be located at a depth of 25 feet. On a flexible leader, it can negotiate a 90-degree turn in a 3" pipe. U.S. Patent # 3,597,680

A-Frame
A-FRAME dual sensor ground probe is available for making a rapid search on a long line. The probe spread is 24". The A-Frame can be purchased as an accessory to the EG-3000 or as a substitute for the standard stirrup probes.
Stirrups
STIRRUP PROBES Allow penetration of the toughest soil conditions while reducing force exerted on the microphone. They are made of very durable sand-cast aluminum and have 3/8" dia. stainless steel spikes.
Helpful information and techniques